How to Properly Clean and Maintain the Different Parts of Your Garage Door #2
Commercial Door Repair Milton: DIY Fixes for Commercial Doors That Won’t Shut
Feb 2, 2024
LOCKSMITH
Have you ever encountered a commercial door that won’t shut properly? Maybe it’s sagging, sticking, or leaving a gap. This can be frustrating, especially if you need to secure your business premises or keep out the cold air. Not to mention, a faulty door can pose a safety hazard and damage your reputation.
Fortunately, you don’t have to call a professional commercial door repair service in Milton right away. There are some simple DIY fixes that you can try to solve the problem yourself. Of course, this depends on the type and severity of the issue, as well as your skill level and tools. But in many cases, you can save time and money by following some easy steps.
In this article, we’ll show you how to fix some common problems with commercial doors that won’t close right. We’ll also tell you when you should call a commercial door repair expert instead of attempting a DIY solution. Let’s get started!
Easy Steps to Fix Doors That Won’t Close Right
One of the most common reasons why a commercial door won’t shut properly is because it’s out of alignment. This can happen due to wear and tear, improper installation, or changes in temperature and humidity. When a door is misaligned, it can rub against the frame, the floor, or the jamb, causing friction and resistance.
To fix a misaligned door, you’ll need some basic tools like a screwdriver, a hammer, a drill, and some shims. Here are the steps to follow:
Check the hinges. Loose or damaged hinges can cause the door to sag or shift. Tighten the screws on the hinges, or replace them if they are worn out. You can also use shims to adjust the position of the hinges and level the door.
Check the strike plate. The strike plate is the metal piece that the latch goes into when the door is closed. If the strike plate is not aligned with the latch, the door won’t close securely. You can loosen the screws on the strike plate and move it slightly up or down, left or right until it matches the latch. You can also use a file to enlarge the hole on the strike plate if it’s too small.
Check the door frame. Sometimes, the door frame can warp or crack, causing the door to fit poorly. You can use a carpenter’s square to measure the angles of the frame and see if they are square. If not, you can use shims or nails to adjust the frame and make it straight. You can also use wood filler or caulk to fill any gaps or cracks on the frame.
These are some easy steps to fix doors that won’t close right. However, if these methods don’t work, or if the problem is more complex, you may need to call a professional commercial door repair Milton. They have the expertise and equipment to handle your door repair in Milton, whether it’s a sliding door repair, a screen door repair, or a sliding glass door repair.
Solving Problems with Door Latches and Strikes Yourself
Another common reason why a commercial door won’t shut properly is because of problems with the door latch and strike. The door latch is the part that extends from the edge of the door and goes into the strike plate on the frame. The strike is the hole or slot that receives the latch. If the latch and strike are not aligned or functioning well, the door won’t lock or stay closed.
To solve problems with door latches and strikes yourself, you’ll need some tools like a screwdriver, a hammer, a chisel, a file, and some lubricant. Here are the steps to follow:
Check the latch. The latch should move smoothly and spring back when you press it. If it’s stuck or loose, you can try to lubricate it with some oil or grease. You can also adjust the screws on the latch plate to tighten or loosen the latch. If the latch is broken or damaged, you’ll need to replace it with a new one.
Check the strike. The strike should be aligned with the latch and have enough room for it to enter. If the strike is misaligned, you can loosen the screws on the strike plate and move it slightly up or down, left or right, until it matches the latch. You can also use a chisel and a hammer to enlarge the strike hole if it’s too small. If the strike is worn out or damaged, you’ll need to replace it with a new one.
These are some ways to solve problems with door latches and strikes yourself. However, if these methods don’t work, or if the problem is more complicated, you may need to call a professional commercial door repair service in Milton. They can handle any type of door repair, whether it’s a door jamb repair, a sliding door repair service, or a screen door repair.
Making Sure Your Door Shuts Tight: Seals and Sweeps
Another reason why a commercial door won’t shut properly is because of problems with the door seals and sweeps. The door seals are the rubber or foam strips that line the edges of the door and the frame. The door sweeps are the metal or plastic pieces that attach to the bottom of the door and sweep the floor. The seals and sweeps help to prevent air leaks, noise, dust, insects, and water from entering or exiting the building.
To make sure your door shuts tight, you’ll need to check the condition and fit of the seals and sweeps. Here are the steps to follow:
Check the seals. The seals should be intact and snug, without any cracks, gaps, or tears. If the seals are loose or damaged, you can try to reattach them with some adhesive or nails. You can also replace them with new ones that match the size and shape of your door and frame.
Check the sweeps. The sweeps should be level and smooth, without any bends, dents, or scratches. They should also touch the floor evenly, without leaving any gaps or dragging too much. If the sweeps are loose or damaged, you can try to adjust them with some screws or bolts. You can also replace them with new ones that fit your door and floor type.
These are some ways to make sure your door shuts tight. However, if these methods don’t work, or if the problem is more serious, you may need to call a professional commercial door repair service in Milton. They can handle any kind of door repair, whether it’s a sliding door repair, a sliding glass door repair, or a screen door repair.
Conclusion
Commercial doors are essential for any business, as they provide security, insulation, and aesthetics. However, they can also develop problems that prevent them from shutting properly. This can be annoying, inconvenient, and unsafe for you and your customers.
If you encounter a commercial door that won’t shut properly, you can try some of the DIY fixes that we’ve discussed in this article. They are easy to follow and can save you time and money. However, if the problem is beyond your skill or tool level, or if you want to avoid the hassle and risk of damaging your door, you should call a professional commercial door repair service in Milton.
One of the best commercial door repair companies in Milton is Minute Locksmith. We have over 30 years of experience in providing high-quality door repair services, including emergency door repair and 24 hour door repair. We can handle any type of door repair, whether it’s a door jamb repair, a sliding door repair, a screen door repair, or a sliding glass door repair. We also offer affordable prices and fast response times.
If you need a reliable and expert commercial door repair in Milton, don’t hesitate to contact Minute Locksmith today.
Frequently Asked Questions
Can I fix a commercial door that won’t shut properly by myself?
Yes, many common issues like misalignment, loose hinges, or faulty strike plates can be fixed with basic tools and DIY methods. However, the complexity of the fix depends on the problem’s nature and your skills.
What tools do I need for basic commercial door repairs?
Basic tools include a screwdriver, hammer, drill, shims, chisel, file, and lubricant. The exact tools depend on the specific repair needed.
How do I adjust a misaligned commercial door?
Check and tighten the hinges, adjust or replace the strike plate, and ensure the door frame is not warped. Shims can be used for minor adjustments to level the door.
What should I do if the door latch or strike is the issue?
Lubricate a stuck latch, adjust or replace the latch plate, and ensure the strike plate is aligned with the latch. You may need to enlarge the strike hole for a better fit.
How can I ensure my commercial door seals properly?
Inspect and replace damaged door seals and sweeps to prevent air leaks and ensure the door shuts tightly. Adjust or replace sweeps to ensure they contact the floor evenly.
When should I call a professional door repair service in Milton?
If DIY fixes don’t solve the problem, the issue is complex, or you’re unsure about your repair skills, it’s best to contact a professional service like Minute Locksmith for reliable and efficient repairs.
What services do professional door repair companies in Milton offer?
Professional services include a wide range of repairs, from simple adjustments to complete replacements, for various types of commercial doors, ensuring security and functionality.
Is it cost-effective to attempt DIY door repairs?
DIY repairs can save money if you have the right tools and skills. However, incorrect repairs can lead to further damage, so evaluate the situation carefully before proceeding.
Frequently Asked Questions
Yes, many common issues like misalignment, loose hinges, or faulty strike plates can be fixed with basic tools and DIY methods. However, the complexity of the fix depends on the problem’s nature and your skills.
Basic tools include a screwdriver, hammer, drill, shims, chisel, file, and lubricant. The exact tools depend on the specific repair needed.
Check and tighten the hinges, adjust or replace the strike plate, and ensure the door frame is not warped. Shims can be used for minor adjustments to level the door.
Lubricate a stuck latch, adjust or replace the latch plate, and ensure the strike plate is aligned with the latch. You may need to enlarge the strike hole for a better fit.
Inspect and replace damaged door seals and sweeps to prevent air leaks and ensure the door shuts tightly. Adjust or replace sweeps to ensure they contact the floor evenly.
If DIY fixes don’t solve the problem, the issue is complex, or you’re unsure about your repair skills, it’s best to contact a professional service like Minute Locksmith for reliable and efficient repairs.
Professional services include a wide range of repairs, from simple adjustments to complete replacements, for various types of commercial doors, ensuring security and functionality.
Accordion Content
Minute Locksmith is a well-established and experienced Locksmith & Doors company. We are locally operated and have a team of skilled, knowledgeable and efficient technicians. Our technicians are available 24/7 at your request and are equipped with the latest equipments to meet your home, business or auto locksmith needs.
Copyright © 2024 All rights reserved. Minute Locksmith
Design & built by Digital Recipe
close