Locksmith Richmond Hill Broken Door Repair team is fully ready and available to come to your property and fix sticky, noisy or just plain broken pocket doors. If you have one of these problems, Locksmith Richmond Hill Broken Door Repair team will install a new track, new rollers or both, and your pocket door will work like it did when it was new. Call for our experts at Locksmith Richmond Hill Broken Door Repair – call us 24/7!
Richmond Hill Broken Door Repair
Our team is mobile, fully equipped with all supplies, tools, equipment, knowledge and experience to fix any kind of door. Residential, commercial or any other door. If in need of a new track, rollers or any other door parts, we will help you replace the broken hardware. First, we will assess the part needed, and we also give you some tips on how to do it yourself.
Remove painted-over screws. Cut the paint seam between the door stop and the casing, but do not remove the casing. Pry off the door stops with a stiff putty knife. Remove the door. Sometimes the hardest part is getting the door out of the pocket or off the track. Pull out a door stuck in the pocket by alternately pulling the top and bottom edges. Remove a door from a J-track by pushing away to pop the rollers out of the track. Remove a door with roller-skate-type rollers by prying the door up and tapping on the rollers to release them.
If you are in need of new track and rollers, first cut an access hole in the wall with a drywall saw to remove the old track and install a new one. Check for obstructions before pounding the saw through the plaster or drywall to start the cut. If you need both a new track and a set of rollers, get them from a builders’ supply store, or order them from your local home center.
Even though doing it yourself is not very complicated, you still need the proper tools and knowledge. You do not want to get hurt in the process. So, whenever you need help, Locksmith Richmond Hill is only a phone call away. Call us now!
Copyright © 2024 All rights reserved. Minute Locksmith
